Briefly, this error occurs when there is a mismatch between the cluster state versions of different nodes in an Elasticsearch cluster. This can happen due to network issues, or when a node rejoins the cluster after a period of disconnection. To resolve this issue, you can try the following: 1) Ensure all nodes in the cluster are running the same version of Elasticsearch. 2) Check the network connectivity between all nodes. 3) If a node is frequently disconnecting and reconnecting, investigate the cause and fix it to prevent the node from falling out of sync.
This guide will help you check for common problems that cause the log ” incompatible cluster state version – resending complete cluster state ” to appear. To understand the issues related to this log, read the explanation below about the following Elasticsearch concepts: cluster, discovery and version.
Overview
The process known as discovery occurs when an Elasticsearch node starts, restarts or loses contact with the master node for any reason. In those cases, the node needs to contact other nodes in the cluster to find any existing master node or initiate the election of a new master node.
How it works
Upon startup, each node looks for other nodes, firstly by contacting the IP addresses of eligible master nodes held in the previous cluster state. If they are not available, it will look for nodes based upon the seed host provider mechanisms available.
Seed host providers may be defined in 3 ways: list based, file based or plugin based. All of these methods provide a list of IP addresses or hostnames which the node should contact in order to obtain a list of master eligible nodes. The node will contact all of these addresses in turn, until either an active master is found, or failing that, until sufficient nodes can be found to elect a new master node.
Examples
The simplest form is to define a list of seed host providers in elasticsearch.yml:
discovery.seed_hosts: - 192.168.1.10:9300 - 192.168.1.11 - seeds.mydomain.com
An alternative way is to refer to a file using the following setting:
discovery.seed_providers: file
The file MUST be placed in the following filepath: $ES_PATH_CONF/unicast_hosts.txt
10.10.10.5 10.10.10.6:9305 10.10.10.5:10005 # an IPv6 address [2001:0db8:85a3:0000:0000:8a2e:0370:7334]:9301
Note that the use of a port is optional. If not used, then the default port range of 9300-9400 will be used.
If you use AWS or GCS then you can install and use a plugin to obtain a list of seed hosts from an API. A plugin also exists for Azure but is deprecated since version 5.
AWS plugin
A typical configuration could be as follows:
discovery.seed_providers: ec2 discovery.ec2.tag.role: master discovery.ec2.tag.environment: dev discovery.ec2.endpoint: ec2.us-east-1.amazonaws.com cloud.node.auto_attributes: true cluster.routing.allocation.awareness.attributes: aws_availability_zone
The above configuration would look for all nodes with a tag called “environment” set to “dev” and a tag called “role” set to “master”, in the AWS zone us-east-1. The last two lines set up cluster routing allocation awareness based upon aws availability zones. (Not necessary, but nice to have).
GCE plugin
A typical configuration could be as follows:
discovery.seed_providers: gce cloud.gce.project_id: <your-google-project-id> cloud.gce.zone: <your-zone> discovery.gce.tags: <my-tag-name>
The above configuration would look for all virtual machines inside your project, zone and with a tag set to the tag name you provide.
Notes and good things to know
Cluster formation depends on correct setup of the network.host settings in elasticsearch.yml. Make sure that the nodes can reach each other across the network using their IP addresses / hostname, and are not getting blocked due to firewall settings on the ports required.
Overview
A version corresponds to the Elasticsearch built-in tracking system that tracks the changes in each document’s update. When a document is indexed for the first time, it is assigned a version 1 using _version key. When the same document gets a subsequent update, the _version is incremented by 1 with every index, update or delete API call.
What it is used for
A version is used to handle the concurrency issues in Elasticsearch which come into play during simultaneous accessing of an index by multiple users. Elasticsearch handles this issue with an optimistic locking concept using the _version parameter to avoid letting multiple users edit the same document at the same time and protects users from generating incorrect data.
Notes
You cannot see the history of the document using _version. That means Elasticsearch does not use _version to keep a track of original changes that had been performed on the document. For example, if a document has been updated 10 times, it’s _version would be marked by Elasticsearch as 11, but you cannot go back and see what version 5 of the document looked like. This has to be implemented independently.
Common problems
If optimistic locking is not implemented while making updates to a document, Elasticsearch may return a conflict error with the 409 status code, which means that multiple users are trying to update the same version of the document at the same time.
POST /ratings/123?version=50
{
"name": "Joker",
"rating": 50
}Log Context
Log “incompatible cluster state version – resending complete cluster state” classname is LocalDiscovery.java.
We extracted the following from Elasticsearch source code for those seeking an in-depth context :
}
try {
newNodeSpecificClusterState = discovery.lastProcessedClusterState.readDiffFrom(StreamInput.wrap(clusterStateDiffBytes)).apply(discovery.lastProcessedClusterState);
logger.trace("sending diff cluster state version [{}] with size {} to [{}]"; clusterState.version(); clusterStateDiffBytes.length; discovery.localNode().getName());
} catch (IncompatibleClusterStateVersionException ex) {
logger.warn("incompatible cluster state version - resending complete cluster state"; ex);
}
}
if (newNodeSpecificClusterState == null) {
if (clusterStateBytes == null) {
clusterStateBytes = Builder.toBytes(clusterState);
[ratemypost]
